
Same-day metal pickup and hauling across MD
Scrap Metal Removal in Balitmore, MD Done Right
Scrap Metal Removal in Balitmore, MD is the fastest way to clear old appliances, pipes, and rusty iron from your property. We handle scrap metal hauling Balitmore MD for homeowners, landlords, and contractors who need the pile gone today. Our crew loads, straps, and hauls everything to a licensed recycling yard, so you never touch a pry bar. Call +1 410-526-6999 and we roll a truck to your curb.
What's included
What Our Scrap Metal Removal Includes
Every job includes loading, transport, and recycling at a licensed yard. We bring the tools, the truck, and the muscle. You point at the metal and we take it from there. Here is what is covered on a standard pickup, and what counts as an add-on.
Loading and Labor
Two trained crew members load every item by hand, hand truck, or furniture dolly. We bring work gloves, ratchet straps, and a tarp to protect your floors and stairs. You do not lift anything, and you do not need to be home if we have access.
Appliance Disconnection
We unhook water lines, gas lines, and power cords on fridges, washers, and water heaters before removal. Standing water gets drained into a bucket, not your floor. Refrigerant-bearing appliances are handled under EPA guidelines before recycling.
On-Site Breakdown
Oversized items like boilers, steel shelving, and pool frames get cut or knocked down with a pry bar or sledgehammer so they fit through doors and gates. We bag the small hardware so nothing gets lost in the truck or on your lawn.
Transport and Recycling
Your metal rides in a dump truck to a licensed recycler in the MD area. We separate ferrous from non-ferrous so steel, aluminum, copper, and brass each go to the right stream. Yard tickets are available on request for commercial jobs.
Sweep and Final Walkthrough
Before we leave, we broom the area, check the path we used, and walk the space with you. If anything was missed, we grab it. Most customers say the space looks better than they expected, which is the point.
Service overview
Scrap Metal Removal in Balitmore, MD Explained
Scrap Metal Removal in Balitmore, MD is the pickup, loading, and recycling of ferrous and non-ferrous metal from homes, garages, and job sites. That covers dead water heaters, cast-iron radiators, aluminum gutters, copper pipe, steel shelving, and the tangle of rebar left after a demo. We sort ferrous from non-ferrous on the truck, weigh the load at a licensed yard, and recycle it instead of dumping it in a landfill. Most single-item pickups take 20 to 40 minutes from arrival to pull-away.
Balitmore's older rowhouse stock means basements and back alleys fill up with metal fast. A failed furnace, a torn-out radiator, or a stack of pipe from a bathroom remodel sits for months because curbside trash crews will not take it. That is where scrap metal hauling Balitmore MD comes in. We work tight alley access, steep basement stairs, and narrow gates that a dump truck cannot reach. If you searched same-day scrap metal removal Balitmore near me, we can usually be there within a few hours.
The service timeline
How Our Scrap Metal Pickup Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Call or Text
Tell us what you have: a dead fridge, a pile of pipe, a whole basement of metal. Send a photo if it is easier. We ask about stairs, alley width, and whether the item is still hooked to water or gas. That takes about 5 minutes and lets us quote accurately.
Firm Quote
We give you a flat price on the spot, based on volume and access, not weight. You will know the number before we dispatch. If the pile is bigger than described, we tell you the new price before we start loading, never after.
Crew Arrives
A two-person crew shows up in the arrival window with gloves, a hand truck, and a dump truck. We walk the pile with you, confirm what stays and what goes, and lay down a tarp if the path runs across finished flooring. Setup takes under 10 minutes.
Load and Haul
We disconnect appliances, drain any standing water, and break down oversized frames with a pry bar or sledgehammer. Everything gets strapped into the truck bed. A typical single-appliance job is loaded in 15 minutes; a full basement cleanout runs 2 to 3 hours.
Sweep and Recycle
We broom the area, haul the load to a licensed recycler, and text you a confirmation when it is processed. You get a clean space and the knowledge that your metal was recycled, not dumped. Payment is due on completion by card or cash.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Appliance hand truck
Moves fridges, washers, and water heaters up and down stairs without scratching walls or floors. The strap system keeps a 300-pound unit from tipping on a rowhouse staircase.
Furniture dolly
Rolls cast-iron radiators, steel shelving, and heavy toolboxes across flat surfaces and out to the truck. Cuts the number of trips and the risk of a back injury.
Pry bar and sledgehammer
Breaks down oversized items like boilers, pool frames, and steel studs on site so they fit through narrow gates and doorways. Saves a second trip and keeps the alley clear.
Ratchet straps and tarp
Secures every load in the dump truck bed so nothing shifts on the road. The tarp protects finished flooring and stair treads while we carry metal through your home.
Work gloves and safety gear
Standard on every job. Scrap metal cuts, and rust flakes. Our crew wears gloves, boots, and eye protection from the first item to the last.
Dump truck
Carries mixed loads of metal, appliances, and debris in one trip. A full-size bed means a whole basement cleanout fits without a second run to the yard.
Use cases
When to Call for Scrap Metal Pickup
These examples show how the service framework adapts rather than forcing every call through one repair.

Garage Cleared in One Trip
A Canton homeowner had 20 years of metal shelving, three bike frames, two toolboxes, and a dead fridge packed into a one-car garage. The car had not fit inside since 2015. → We loaded everything in one dump truck run, separated the steel for recycling, and swept the concrete. The job took 2 hours and 45 minutes. The homeowner parked inside that same evening.
Storm Metal Out Same Day
A storm dropped a bent aluminum awning and 40 feet of gutter into a Fells Point backyard. The metal was tangled with branches and blocked the rear gate. → We cut the awning into sections, pulled the gutters free, and loaded the metal in one trip. The yard waste was chipped separately. Total time on site was 90 minutes, and the gate was usable again.
Problems we solve
Metal Problems We Solve in Balitmore
Metal does not rot, but it does rust, leak, and take up space you need. These are the calls we get most often from Balitmore homeowners and property managers.
Dead appliances leaking water in the basement
We drain the appliance into a bucket before moving it, then haul it up the stairs on an appliance hand truck. The metal shell goes to a recycler, and the refrigerant is handled under EPA rules. Most single-appliance jobs are done in under 30 minutes.
Cast-iron radiators too heavy to move
Our crew breaks the radiator down on site with a sledgehammer and pry bar, then carries the sections out in manageable pieces. We lay a tarp on the path first. The cast iron goes straight to a licensed yard for recycling.
Construction metal piling up after a renovation
We bring a dump truck and load the whole pile in one trip. Metal gets separated and recycled; the rest goes to a debris box. Contractors in Canton and Highlandtown use us weekly to keep their sites clear.
Curbside trash will not take metal
One call and it is gone. We take ferrous and non-ferrous metal, separate it, and deliver to a licensed recycler. You skip the rental truck, the yard line, and the chance your load gets rejected for being mixed.
Pricing process
Scrap Metal Removal Pricing
$95 - $700 depending on volume, access, and disconnection work
Volume of metal
A single fridge or water heater is a small load. A basement full of pipe, radiators, and shelving fills a dump truck bed and takes longer to load. Volume drives most of the price difference between a $95 job and a $700 job.
Access and stairs
A driveway pickup takes 15 minutes. A third-floor walk-up with a turning stairwell can take 45 minutes for the same item. We charge for the labor the access requires, and we tell you that upfront.
Disconnection work
Unhooking a water line, gas line, or power cord adds time and risk. Appliances still connected to water or gas cost more to remove than ones already disconnected. We handle the disconnect either way.
Customer reviews
What Balitmore Customers Say
“I had a dead furnace and about 200 pounds of cast-iron pipe in the basement. Two guys showed up in the window they promised, carried it all up the stairs on a hand truck, and swept the floor. Flat price was $425, exactly what they quoted. No upsell, no drama. I already booked them for my rental in Dundalk.”
“Tenant left behind a fridge, a stove, and a stack of metal shelving in a third-floor walk-up. Haul Away had it out in about 90 minutes and recycled the metal. They texted me a photo of the empty unit before they left. That is the kind of proof I need as an out-of-state landlord.”
“We tear out a lot of kitchens and baths, so we generate pipe, ductwork, and old appliances every week. These guys are our go-to for scrap metal hauling. They work around our schedule, keep the alley clean, and the pricing is predictable. Been using them for three years now.”
How much does scrap metal removal cost in Balitmore?
Most Balitmore scrap metal jobs run $95 to $700 in 2026, depending on volume and access. A single appliance or a small pile of pipe sits at the low end. A full basement of cast iron, steel shelving, and old ductwork lands at the high end. Stairs, narrow alleys, and disconnection work add to the price. You get a flat quote before we load, so the number does not change.
Do you offer same-day scrap metal hauling in Balitmore?
Yes. Call before 2 p.m. and we can usually be at your MD address within a few hours. We keep two trucks staged for short-notice work, including emergency calls after a burst pipe soaks a furnace or a landlord needs a unit cleared before a new tenant moves in. You get a 30-minute arrival window by text.
Do you buy scrap metal in Balitmore, MD?
We do not pay cash for scrap. We charge a flat hauling and recycling fee, and we handle the loading, transport, and yard paperwork. That is usually cheaper than renting a truck and making two trips to a yard that may reject a mixed load. If your metal is clean copper or brass in bulk, we can talk about a reduced rate.
How to dispose of scrap metal in Balitmore?
Curbside trash crews in Balitmore will not take appliances, pipe, or large metal. Your options are a licensed recycler, a transfer station, or a hauling crew. We take ferrous and non-ferrous metal, separate it, and deliver to a licensed yard. Appliances with refrigerant get processed under EPA rules. Most jobs are done in under 3 hours.
Ready when you are
Book Scrap Metal Removal in Balitmore, MD Today
One call, one flat price, and the metal is gone. We are licensed, insured, and have been hauling in Balitmore since 2015. Call +1 410-526-6999 now and we will give you a firm quote in about 5 minutes.

Talk with the local team
Request Scrap Metal Removal
Reach out for a free quote on junk removal in Balitmore. We answer calls 24/7 for emergencies. Our office hours are Monday-Friday, 8 AM to 6 PM. We respond to all inquiries within one hour during business hours. Call, email, or stop by.



